Showing 1–12 of 59 results

Abrasion Resistant Polyurea
DOWNLOAD TECHNICAL DATA SHEET

Akfix HP 1044 is a very fast curing, 2-component aromatic pure polyurea system, 100% solid, flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend.

ADIPLAST-M
DOWNLOAD TECHNICAL DATA SHEET

Description

  • Powder based dry blend.
  • Increases watertightness.
  • Enhanced workability.
  • Increases resistance to aggressive conditions.
  • Reduced water absorption.
  • Increased compressive strength.
  • Improves the anti-corrosive properties of mortar/concrete.
  • Chloride free.
ADIPLAST-P
DOWNLOAD TECHNICAL DATA SHEET

Special waterproofing agent for producing high quality plasters

Description

  • Powder based dry blend.
  • Increases resistance to aggressive influences.
  • Improves workability.
  • Reduced water absorption.
  • Produces plasters with excellent hydrophobic properties.
  • Increases the air pocket content and salt storage volume.
ADVANCED GEOTEXTILE FIBERGLASS MEMBRANE
Read more

Our specially designed advanced Geotextile waterproofing membrane ensures that our client have greater peace of mind when we offer them our Maricoat/ Marithan Waterproofing systems.

Hydrosil Geotextile fiberglass comes in 3 categories : 50 grams, 220 grams and 300 grams.

Aliphatic Polyurea
DOWNLOAD TECHNICAL DATA SHEET

Akfix AL 1070 is a %100 solid, fast curing, 2 component, UV resistive, aliphatic pure polyurea system. Its formulation is designed for maintaining high color stability and preventing discoloration where surfaces are exposed to sun light continuously.

AQUAFIN ADMIX AQ100P
Rated 4.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

AQUAFIN-IC ADMIX is a state-of-the crystalline waterproofing admixture available in liquid and powder form. The chemistry within the AQUAFIN-IC ADMIX reacts with moisture, silicate and free lime in the concrete, creating millions of insoluble crystalline fibers, which fill the pores, capillary tracts and minor shrinkage cracks within the concrete. Passage of water through the concrete, either from the positive or negative water pressure side is permanently blocked and the reinforcement protected from corrosion. AQUAFIN-IC ADMIX can be added to the concrete mix at the time of batching or at the job site to a ready mix truck with full mixing capabilities.

AQUAFIN FIX 10-S
DOWNLOAD TECHNICAL DATA SHEET

FIX 10-S is an ultra fast setting, chloride free hydraulic cement for use on concrete substrates, which sets immediately when exposed to water.

AQUAFIN I380
Rated 4.50 out of 5
DOWNLOAD TECHNICAL DATA SHEET

Areas of application:
For producing retrospectively applied horizontal barriers in accordance with the WTA work sheet “Injections in masonry against capillary moisture”, against rising damp up to 95 % moisture saturation in masonry work constructed from e.g. brick, clinker, lime-sand blocks, natural stone including joints. Injection is carried out using a hand applied spray gun without pressure (< 10 bar).

AQUAFIN InjectPro-LV
Rated 5.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

AQUAFIN InjectPro-LV is a low viscosity, hydrophobic polyurethane injection grout with impressive elongation characteristics. It is designed for sealing leaking cracks or joints where some movement is possible. The system is comprised of an “A” component (base resin) and a “B” component (accelerator). The “B” component is used by the applicator to adjust the set times for various job site specific conditions.

AQUAFIN RAPIDFLEX-213
Rated 5.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

AQUAFIN-RAPIDFLEX-213 is a new generation of highly-reactive two-component injection resins used for sealing joints and cracks in concrete and stone. It has been especially developed for injecting against flowing water. By combining a special polymer dispersion with hydrophilic polyurethane prepolymers a material is developed which hardens to a rubbery, elastomeric mass with high tensile and compressive strength and which does not need to be re-injected.

AQUAFIN REBAR PRIMER/BOND-CI
Rated 4.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET
AQUAFIN REBAR PRIMER/BOND-CI is a one-component, cementitious, anti-corrosion coating for protection of steel reinforcement and as a bonding agent for concrete surfaces.

Typical Applications:

  • As an anti-corrosion, protective coating for steel rebar in concrete restoration
  • As a bonding agent for concrete repair mortars or fresh concrete