Showing all 8 results

BETOCRETE- A100
Rated 5.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

Water Reducing / Plasticizing Concrete Admixture

BETOCRETE-A100 is a high performance, liquid, water-reducing “plasticizer” & waterproofing concrete admixture formulated to improve workability, reduce permeability and improve durability. Once incorporated in the mix, BETOCRETE-A100 is adsorbed on the cement particles‘ surface inducing a powerful deflocculating property, effectively reducing the concrete mixing water demand and improving physical and mechanical properties of the resultant concrete. BETOCRETE-A100 is based on a blend of modified Lignosulphonates and organic modifiers designed with the main purpose of reducing workability loss.

BETOCRETE-C21 (DM)
DOWNLOAD TECHNICAL DATA SHEET

3rd generation Crystalline Waterproofing Admixture, Concrete Admixture to EN 934-2:T9

Description

  • Inorganic, liquid admixture for waterproofing / reducing the water permeability of concrete constructions.
  • Liquid admixture which therefore does not tend to lump during batching.
  • Mode of action is permanent and irreversible.
  • Density: 1.05 g/cm³.
  • Dosage Range: 2.0-3.0% by weight of cement.
BETOCRETE-F2 (BV/FM)
Rated 5.00 out of 5
Read more

Universal Superplasticizer

Properties and Benefits:

BETOCRETE-F2 (BV/FM) is a superplasticizer based on naphthalene sulphonate which acts as a plasticizer at low dosage rates and as a superplasticizer in case of higher dosage rates. Significant slump increases and thus a better workability can be achieved without changes of the water-cement ratio. Or, on the other hand, the water-cement ratio can be substantially reduced while maintaining the same slump. This usually results in a higher compressive strength. Concrete, modified with BETOCRETE-F2 (BV/ FM), does not lead to sticky surfaces which significantly improves the finishability of the concrete.

DOWNLOAD DATA SHEET

BETOCRETE-F4 (FM)
Read more

Concentrated Superplasticizer and Naphthalene Sulphonate

BETOCRETE®-F4 (FM) – High efficiency superplasticiser for ready-mix and precast concrete. BETOCRETE-F4 (FM) is a concentrated superplasticiser for low w/c concretes or where highly flowable mixes are required without affecting setting times. Based on naphthalene sulphonate, BETOCRETE-F4 (FM) will result in better dispersion of cement agglomerates and optimal wetting of cement particles. BETOCRETE-F4 (FM) is particularly suited for the production of ready mix and pre-cast concretes.

DOWNLOAD DATA SHEET

BETOCRETE-F63
Rated 4.50 out of 5
DOWNLOAD TECHNICAL DATA SHEET

 

High – range water reducing / Superplasticizing concrete admixture

BETOCRETE-F63 is a high-range, water-reducing, superplasticizing concrete admixture formulated to produce high quality concrete in hot climates with excellent flowing properties to improve early & ultimate strengths. BETOCRETE-F63 has significant waterreduction properties and is suitable for mixes containing mineral admixtures (cement replacers). Both physical and mechanical properties of the set concrete are greatly improved. BETOCRETE-F63 is based on a selection of synthetic polymers and organic substances and can be used to reduce cement consumption whilst enhancing flow performance of fresh concrete.

 

BETOCRETE-G1000
Rated 5.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

Retarding & high – range water reducing / Superplasticizing concrete admixture

BETOCRETE-G1000 is a retarding, high-range, waterreducing, superplasticizing concrete admixture. BETOCRETE-G1000 is formulated to produce high quality concrete in hot climates with excellent flowing properties whilst increasing retardation and extending transportation times. Once incorporated in the mix, BETOCRETE-G1000 is adsorbed on the cement particles surface inducing a powerful deflocculating property, effectively reducing mixing water demand and improving both physical and mechanical properties of the resultant concrete. BETOCRETE-G1000 is based on a selection of synthetic polymers.

REMICRETE SR + SP56
Rated 4.50 out of 5
DOWNLOAD TECHNICAL DATA SHEET
Superplasticizing additive in concrete on the basis of the modified polymers. Designed for concrete with an extended development time.

Properties:
REMICRETE-SP56 (FM) is a highly effective polymerbased admixture. Thanks to the innovative materials used, it is possible to produce highly homogeneous concrete admixtures with the internal friction forces minimized, as compared to traditional plasticizers.
The plasticizer also enables ensuring high concrete workability times in summer.

REMICRETE-SP10 (BV)/(FM)
Rated 5.00 out of 5
DOWNLOAD TECHNICAL DATA SHEET

High-performance superplasticizer for SCC, complies with EN 934-2:T3.1 & 3.2

Description

  • PCE superplasticizer.
  • Low dosage rates.
  • Increases early and final strength.
  • Ideal for SCC in ready-mix concrete but also precast.
  • Excellent fair-faced concrete surfaces.
  • Double certification according to DIN EN 934-2 as a plasticizer and superplasticizer.
  • Density: 1.10 g/cm³.
  • Dosage range: 0.2-1.6% on cement.