Showing all 7 results

AK7P | Flexible tile adhesive
DOWNLOAD DATA SHEET

Description

  • Flexible tile adhesive to DIN EN 12004, C2 TE.
  • Creamy consistency and easy to use.
  • Long open time.
  • Particularly good non-slump.
  • For interior and exterior use.
  • Tested with bonded waterproof membranes SANIFLEX, AQUAFIN-2K/M, AQUAFIN-2K with technical test certificate.
  • Very low emissions – GEV EMICODE EC1 Plus R.
ASO-Flexfuge | Polymer modified flood grout – rapid setting
DOWNLOAD DATA SHEET

Description

  • Polymer-modified, frost-resistant and water-repellent. Easy to use, rapid-hardening. Ready for foot traffic after approx. 2 hrs.
  • For grouting porcelain, vitrified and earthenware tiles, synthetic and natural stone slabs etc. in bathrooms, showers and living areas, on terraces, on facades, in swimming pools, also on heated and flow screeds.
  • Fulfills the requirements for CG2 WA in accordance with DIN EN 13888.
  • For joint widths from 3 to 20 mm wide.
  • Very low emissions – GEV EMICODE EC1 Plus R.
  • Fulfills the AgBB scheme requirements.
CRISTALLFUGE PLUS | Mineral-based multi-function flexible grout 1 – 10 mm
DOWNLOAD DATA SHEET

Dependent on tile format as well as the joint width and depth (refer to the table in the Technical Data Sheet).

LIGHTFLEX | Multi-functional flexible adhesive
DOWNLOAD DATA SHEET

LIGHTFLEX is used as a thin bed adhesive and flow-bed adhesive with a high yield for fixing vitrified and earthenware tiles, ceramic tiles with low water absorption ≤ 0.5% (fully vitrified), clinker, mosaic and natural stone that is neither translucent nor sensitive to discolouration. Uneven wall or floor substrates can be levelled out with LIGHTFLEX up to a thickness of 15 mm before starting tiling. Due to the low weight, transportation to the building site is considerably easier.

SOLOFLEX | Flexible thin-bed and medium-bed tile adhesive
DOWNLOAD DATA SHEET

SOLOFLEX is used as a thin-bed adhesive for vitrified tiles, earthenware tiles, ceramic tiles with low water absorption ≤ 0.5% (porcelain), clinker, mosaic and natural stone that is not translucent or prone to discolouration.

SOLOFLEX-White | Flexible thin bed tile adhesive, white
DOWNLOAD DATA SHEET

SOLOFLEX  | Flexible thin-bed and medium-bed tile adhesive

UNIFIX-S3 | Highly flexible thin-bed adhesive
DOWNLOAD DATA SHEET

Description

  • Tested to DIN EN 12004, C1 TE S2.
  • For interior & exterior use.
  • With especially high deformability.
  • UNIFIX-S3 is used as a thin-bed adhesive for vitrified and earthenware tiles, ceramic tiles with low water absorption ≤0.5% (porcelain), clinker, mosaics and non-translucent natural stone not prone to discolouration.
  • For difficult substrates and heavy duty areas.
  • Permits the fixing of tiles to 8 day old screeds.
  • Suitable for the installation of fully vitrified tiles in exterior areas.
  • Especially suitable for swimming pools, balconies and terraces.
  • Water impermeable.
  • Deforms up to 30 mm.
  • Very low emissions – GEV EMICODE EC2 R.